Yealink T4 Series IP Phones User Guide
125
2. Select OK.
Tip
You can also long press the REDIAL key when the phone is idle to update the phone configuration.
Clearing User's Personalized Configuration Settings
You can clear the personalized configuration settings manually on the phone.
Before You Begin
Your system administrator has enabled the phone to keep the user's personalized settings after auto provisioning.
Procedure
1. Navigate to Menu > Basic > Reset local settings.
On the T42S/T41S/T40P/T40G phones, navigate to Menu > Settings > Basic Settings > Reset local settings.
The phone prompts you whether to reset the local settings.
2. Select OK.
To Next Page
Loading...
