Yealink T40G

Call Features
45
l Use the handset or a headset if you're in an open environment.
l Mute your microphone when you are not speaking, especially in noisy environments.
l Avoid tapping or rustling papers near the microphone.
l Speak in your normal voice without shouting.
Topics
Local Conference
Network Conference
Local Conference
You can initiate a three-way (including yourself) conference calls with your contacts on the phone.
Note
Check with your system administrator to find out if the local conference is enabled on your phone.
Topics
Setting Up a Local Conference Call
Merging Two Calls into a Conference
Inviting a Transfer Target and a Transferee into a Conference
Holding or Resuming a Conference Call
Muting or Unmuting a Conference Call
Splitting a Conference Call
Managing Conference Participants
Ending a Conference Call
Setting Up a Local Conference Call
You can set up a local conference call with up to two contacts.
Procedure
1. Place a call to the first party.
2. When the first party answers the call, select Conference (Conf) to place a new call.
The active call is placed on hold.
3. Dial the second party’s number.
You can also select the desired contact from the search list, or select a contact from the placed call list or Directory
before you enter the number. On the T48S/T48G phones, you can select the desired contact from the left sidebar, or
select a contact from the Directory or History.
4. When the second party answers the call, selectConference (Conf) to invite two parties to join the conference.