Yealink T40G

Getting Started
24
You can tap to switch to the onscreen keyboard.
Related Topic
Using the Onscreen Keyboard
Entering Characters on
T46S/T46G/T42S/T42G/T41S/T41P/T40P/T40G
On T46S/T46G/T42S/T42G/T41S/T41P/T40P/T40G phones, you can use the keypad keys on your phone to enter or
update field information.
The following table describes how to enter different characters using the keypad keys.
Task Action
Switch input modes Press the ABC, abc, Abc, 2aB, or 123 soft key to switch the input modes.
Enter alphas
Select ABC, abc, 2aB, or Abc mode. On the T42S/T42G/T41S/T41P/T40P/T40G phones, press the
keys labeled with letters until your desired letter appears. On the T46S/T46G phones, press a
keypad key repeatedly to view the character options and stop when the letter you want to
enter is displayed in the field. Wait one second, and then enter the next letter.
Enter numbers Select 123 mode, press the corresponding keys.
Enter special char-
acters
Select ABC, abc, 2aB, or Abc mode, press * key or # key one or more times to enter one of the
following special characters:
* key: *.,'?!\-()@/:_;+&%=<>￡ $¥¤[]{}~^¡¿§#"|
# key: #
In 123 mode, you can press the * key to choose the following special characters: .*:/@[].
Insert space Select ABC, abc, 2aB, or Abc mode, press the 0 key.
Move cursor
Press or to position the cursor.
Delete one or more
characters
Position the cursor to the right of the character, and select the Delete soft key.