Yealink T40G User Manual

Advanced Call Features
64
LED Status
Icons
Description
T48S/T48G T46S/T46G
Solid green The monitored line is idle.
Fast-flashing
red
(Flashing)
The monitored line is ringing.
(Flashing)
The monitored line is dialing.
Solid red The monitored line is busy or in a call.
Slowly-flash-
ing red
The monitored line places a call on hold.
A call is parked to the monitored line.
Off Monitored line fails to register or does not exist.
Audio Alert for BLF Pickup
The Audio Alert for BLF Pickup feature allows your phone to play a tone when the specified monitored line receives an
incoming call.
Topic
Setting an Alert Tone for Monitored Lines
Setting an Alert Tone for Monitored Lines
You can set the alert ring type for the monitored lines to make it easier to recognize.
Before You Begin
Check with your system administrator to find out if the Audio Alert for BLF Pickup feature is available.
Procedure
1. Navigate to Menu > Basic > Sound > BLF Ring Type.
On the T42S/T42G/T41S/T41P/T40P/T40G phones, navigate to Menu > Settings > Basic Settings > Sound > BLF
Ring Type.
2. Select the desired ring tone.
3. Select Save.
Visual Alert for BLF Pickup
Your system administrator can configure your phone to display the call information when the specified monitored line
receives an incoming call.
You can select to pick up the call to the monitored line, place a call to the monitored line, place a new call or go back
to the idle screen.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries