Call Features
47
1. Select Split.
Managing Conference Participants
You can manage the conference participants to make the conference more flexible.
Procedure
1. During a conference call, on the T46S/T46G/T42S/T42G/T41S/T41P/T40P/T40G phones, select Manage.
2. Select the desired party, you can do the following:
l Select Far Mute (FarMute) to mute the party. The muted party can hear everyone, but no one can hear the
muted party.
l Select Far Hold (FarHold) to hold the party. The held party cannot hear anyone, and no one can hear the held
party.
l Select Remove to remove the party from the conference call.
On the T48S/T48G phones, you can do the following:
l
Tap to mute the party. The muted party can hear everyone, but no one can hear the muted party. The icon
changes to .
l Tap Hold to hold the party. The held party cannot hear anyone, and no one can hear the held party. The icon
changes to .
l
Tap to remove the desired party from the conference call.
The phone prompts you whether to remove the party.
Tap OK to remove the party from the conference call.
Ending a Conference Call
When you end the conference call, the other parties drop the call.
However, the system administrator can set up your phone so that the other two parties remain connected when you
end the conference call.
Procedure
1. Select End Call (EndCall).
Network Conference
If your system administrator has set a network conference feature on your phone, you can initiate a conference with
two or more contacts.
Topic
Setting Up a Network Conference
Setting Up a Network Conference
You can set up a network conference with two or more contacts.
Procedure
1. Place a call to the first party.
2. Select Conference (Conf).
The active call is placed on hold.
3. Dial the second party’s number.
4. When the second party answers the call, select Conference (Conf) to add the second party to the conference.
5. Select Conference to place a new call.
To Next Page
Loading...
Need help?
General
