5-3
IM 760301-01E
5
Power Measurement
• Changing Using the Function Select Keys
The display of measurement functions of U, I, P, S, Q, λ, φ, WP, q, TIME, FU, FI, and
η and the element/wiring unit can be changed using function select keys.
• Selecting the Item to Be Changed
4. Press ESC to clear the Numeric Form menu.
5. Press the cursor keys to select the item to be changed. The item to be
changed is highlighted.
• Changing the Measurement Function
6. Press the U/I/P, S/Q/
λλ
λλ
λ/
φφ
φφ
φ, WP/q/Time, or FU/FI/
ηη
ηη
η function select key to select the
displayed measurement function.
Press the key corresponding to the measurement function you wish to display.
The display switches each time the key is pressed as follows: U -> I -> P -> original
display.
• Changing the Element/Wiring Unit
7. Press ELEMENT to select the element/wiring unit.
• Changing the Element/Wiring Unit Collectively
8. Press SHIFT+ELEMENT (ALL). ALL LED illuminates, and the element/wiring
unit of all the displayed items on the displayed page can be changed
collectively. This completes the procedure for changing the displayed items
using the function select keys.
• Changing Using the Function Select Key (USER Key)
By assigning measurement functions to the USER key, up to four measurement
functions can be directly displayed.
• Assigning Measurement Functions to the USER Key
9. Press SHIFT+USER (USER SET) to display the User Reserved menu.
10. Press any of the soft keys from Function 1 to 4 to select the desired Function.
The measurement function selection box appears.
11. Press the cursor keys to select any of the measurement functions starting with
None.
12. Press SET. The symbol for the selected measurement function is displayed at
the highlighted position.
• Changing the Measurement Function with the USER Key
13. Press USER to select the measurement function in the same fashion as step 6.
5.1 Displaying Numeric Data and Changing the Displayed Items
To Next Page
Loading...
Need help?
General
