9-10 IM 760301-01E
Executing/Aborting the Save Operation
10. Press ESC to close the List Item dialog box.
11. Press the Save soft key to display the Save Menu.
12. Press the File List soft key to display the File List dialog box.
• Selecting the Save Destination Medium
13. Press the cursor keys to select the storage medium (indicated by [ ]).
14. Press SET to confirm the storage medium.
• Selecting the Save Destination Directory
(Perform this operation when directories are present on the medium.)
15. Press the cursor keys to select the save destination directory (indicated by
< >).
16 . Press SET to confirm the directory.
The selected medium/directory is displayed in “Path=......” located above and to
the left of the File List dialog box.
• Setting the File Name and Comment
17. Press the File Name soft key to display the Save dialog box.
18. Press the cursor keys to select Auto Naming.
19. Press SET to select ON or OFF.
20. Press the cursor keys to select File Name.
21. Press SET to display the keyboard.
22. Use the keyboard to set the file name.
For keyboard operations, see section 3.14, “Entering Values and Strings.”
23. Enter the Comment in a similar fashion.
24. Press ESC to close the Save dialog box.
9.3 Saving Setup Parameters, Waveform Display Data, Numeric Data, Waveform Sampling Data
To Next Page
Loading...
