Need help?Do you have a question about the Zebra Z4Mplus and is the answer not in the manual?
General| Print Method | Thermal transfer or direct thermal |
|---|---|
| Resolution | 203 dpi |
| Max Print Width | 4.09 inches |
| Max Print Length | 39 inches |
| Max Print Speed | 10 inches per second |
| Memory | 4 MB Flash, 8 MB DRAM |
| Interface | Parallel, Serial |
| Media Sensors | Reflective and transmissive |
| Media Width | 0.79 inches to 4.5 inches |
| Media Length | 0.38" (9.6 mm) to 39" (991 mm) |
| Ribbon Width | 2 inches to 4.33 inches |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 40°F to 105°F |
| Storage Temperature | -40 to 140°F (-40 to 60°C) |
| Humidity | 20 to 85% non-condensing |
To Next Page
