Zebra ZXP 7 series Service Manual

202 ZXP Series 7 Card Printer Service Manual P1036102-007
Replacement Procedures for Factory Installed Options
Procedures: MIFARE/Contact Encoder Module
Test and Adjustment
Step 1. Launch the ZMotif Service Partner Tool.
Step 2. Run Smart Card Calibration, Smart Card Contact Read/Write Test, and Smart
Card Contactless Read/Write Test.

Zebra ZXP 7 series Specifications

General

Print Resolution	300 dpi
Connectivity	USB 2.0, Ethernet
Memory	64 MB standard
Print Technology	Dye-sublimation thermal transfer
Card Capacity	200 cards input hopper, 100 cards output hopper
Card Sizes	CR-80 ISO 7810, 2.12" (54 mm) x 3.38" (86 mm)
Power Requirements	100-240 VAC, 50-60 Hz