OPERATION
Axio Imager Coded Axio Imager operation and function controls Carl Zeiss
M70-2-0020 e 06/2009 430000-7344-001 75
Legend to Fig. 4-1:
1 Eyepieces
2 Binocular tube
3 Slot for analyzer slider (usable only, if camera path deflection, left, has not been installed)
4 Push-pull rod for camera path deflection, left, with interface 60N
5 Adjusting aid for HBO/XBO illuminators
6 Illuminator HBO 100 for fluorescence applications
7 Slot F for stop slider with centerable luminous-field diaphragm
8 Slot for 2-position filter wheels, discrete: The filter wheels are not suitable for fluorescence examinations
9 Slot A for FL attenuator, discrete
10 Halogen illuminator HAL 100
11 RL Button - Reflected-light shutter on/off with indicator LED
12 3200K Button - Color temperature of 3200 K on/off with indicator LED
13 TL Button - Transmitted-light shutter on/off with indicator LED
14 Light intensity control
15 Slot for 2-position filter wheels, discrete
16 Lever for transmitted-light diffusing glass
17 Control wheel for luminous-field diaphragm
18 Focusing drive - Fine focusing control, right side
19 Focusing drive - Coarse focusing control, right side
20 Control knob for X travel of mechanical stage
21 Control knob for Y travel of mechanical stage
22 Mechanical stage
23 Condenser carrier (refer also to Fig.
4-2)
24 Polarizer for transmitted light
25 Condenser
26 Objective nosepiece with objectives
27 Reflector turret
28 On/off switch
29 Button for transmitted-light shutter on/off (see also Section
4.8.7)
30 Button for reflected-light shutter on/off (see also Section
4.8.7)
31 Focusing drive - Fine focusing control, left side
32 Focusing drive - Coarse focusing control, left side
33 Button (not used)
34 Button for reducing light intensity of Halogen illuminator HAL
35 Button for increasing light intensity of Halogen illuminator HAL
36 Toggle switch for transmitted/reflected light halogen illuminator
37 Button LM-Set (light manager)
38 Lever for reflected-light diffusing glass
To Next Page
Loading...
