Zoom F8 - Recording a Slate Tone (Slate Tone); Setting Slate Tone Volume

Slate mic/slate tone
Recording a slate tone (Slate Tone)
101
F8 Multi Track Field Recorder
1. Press .
2. Use to select “ SLATE ”,
and press
.
3. Use to select “ Slate
Tone
”, and press .
υ Continue to one of the following procedures.
Setting the volume ............................................................P.101
Setting the frequency ........................................................P.102
Setting the routing ............................................................P.102
Recording ...........................................................................P.103
Disabling the slate tone ....................................................P.104
Setting the volume
4. Use to select “ Level ”,
and press
.
5. Use to adjust the level,
and press
.
HINT
This can be set from −20 to 0 dBFS.
By adding a slate tone when the recording starts, aligning it to a video file during editing will be easier. You can also use this to
coordinate levels with connected equipment.
Recording a slate tone (Slate Tone)