Zoom F8 - Selecting Signals Sent to Sub Outputs (SUB OUT Routing)

Output settings
6HOHFWLQJVLJQDOVVHQWWRWKHVXERXWSXWV68%2875RXWLQJ
85
F8 Multi Track Field Recorder
Selecting signals sent to the sub outputs (SUB OUT Routing)
1. Press .
2. Use to select “ OUTPUT ”,
and press
.
3. Use to select “ SUB OUT
Routing
”, and press .
4. Use to select the track for SUB OUT 1 or SUB
OUT 2 routing and press
.
Clear all settings
Tracks routed to SUB OUT 1
Tracks routed to SUB OUT 2
Set tracks 1–8 to prefader
Switch options:
• Change tracks 1–8 to
postfader
• Change L/R tracks to
postfader
Select prefader
Select postfader
Off
HINT
Press
to cycle through the options: Prefader Ο Postfader Ο
Off.
NOTE
• Tracks 1–8 can be set to Prefader or Postfader.
• The L/R tracks can only be set to Postfader.
• Tracks 1–8 and L/R tracks cannot be set at the same time. Selecting
one type will deselect the other.
5. Press .
You send either prefader or postfader signals for each track to the sub outputs.