Zoom F8 - Jamming Internal Timecode; Restarting Internal Timecode

TIMECODE
Setting timecode
94
Restarting internal timecode with a specified value
4. Use to select “ Restart ”,
and press
.
5. Set the restart value.
π Editing operations
Move cursor or change value:
turn
Select parameter to change: press
6. Use to select “ Restart ”,
and press
.
Jamming internal timecode
Timecode input through the TIMECODE IN jack is used to set
internal timecode.
4. Use to select “ Jam ”, and
press
.
Setting timecode (continued)
Setting timecode (continued)