Zoom F8 - Changing Phantom Power Settings (Phantom)

Input settings
Changing the phantom power settings (Phantom)
65
F8 Multi Track Field Recorder
Changing the phantom power settings (Phantom)
HINT
Phantom power is a function that supplies power to devices that
require an external power supply, including some condenser mics.
The standard power is +48V, but some devices can operate with
lower voltages.
NOTE
Do not use this function with a device that is not compatible with
phantom power. Doing so could damage the device.
1. Press .
2. Use to select “ INPUT ”,
and press
.
3. Use to select “ Phantom ”,
and press
.
υ Continue to one of the following procedures.
Using phantom power ......................................................P.66
Setting the voltage ............................................................P.66
The can provide phantom power. The voltage can be set to +24V or +48V and it can be turned on/off for each input
separately.