Zoom F8 - Selecting Signals Sent to Main Outputs (MAIN OUT Routing)

Output settings
Selecting signals sent to the main outputs (MAIN OUT Routing)
84
Selecting signals sent to the main outputs (MAIN OUT Routing)
1. Press .
2. Use to select “ OUTPUT ”,
and press
.
3. Use to select “ MAIN OUT
Routing
”, and press .
4. Use to select the track for MAIN OUT 1 or MAIN
OUT 2 routing and press
.
Clear all settings
Tracks routed to MAIN OUT 1
Tracks routed to MAIN OUT 2
Set tracks 1–8 to prefader
Switches option:
• Change tracks 1–8 to
postfader
• Change L/R tracks to
postfader
Select prefader
Select postfader
Off
HINT
Press
to cycle through the options: Prefader Ο Postfader Ο
Off.
NOTE
• Tracks 1–8 can be set to Prefader or Postfader.
• The L/R tracks can only be set to Postfader.
• Tracks 1–8 and L/R tracks cannot be set at the same time. Selecting
one type will deselect the other.
5. Press .
You can send either prefader or postfader signals for each track to the main outputs.