Recording
Selecting inputs and adjusting levels
24
You can select which among Inputs 1–8 to use. Inputs will be recorded on tracks with the same numbers. For example, Input 1
will be recorded on track 1 and Input 2 will be recorded on track 2.
Selecting inputs
1. Make the track indicator light by pressing the track
key for the number of the input to record.
The background color of the track number on the LCD also
changes at this time.
Track indicator
Track number
background color
Explanation
Lit red Red The input is enabled.
Unlit Gray The input is disabled.
NOTE
The signals from the inputs selected this way will also be sent to
the L/R tracks.
Linking inputs as a stereo pair
1. While pressing track key 1, press track key 2.
Tracks 1 and 2 will be joined as a stereo track (stereo link).
Repeat the same procedure to disable the stereo link.
HINT
• The 3/4, 5/6 and 7/8 track pairs can also be stereo linked in
the same way.
• When a mic capsule that allows independent L and R input
selection is connected, stereo-linking can also be enabled
and disabled for their tracks.
Selecting inputs and adjusting levels
To Next Page
Loading...
Need help?
General
