Recording
Recording
26
Recording
1. Press .
This starts recording.
HINT
If the timecode function is enabled, recording will start from
frame 00 (00 or 02 when using drop frame) and files will
always end exactly on a second. This makes synchronization
easy when editing later.
2. Press to start a new take when recording.
This will end the current take and start a new take while
continuing to record without interruption.
NOTE
Pressing
during recording is only possible after record-
ing for at least a second.
3. Press to pause.
NOTE
• When pausing, pausing will occur at a whole second
increment.
• When recording is paused, a mark is added at that point.
Press
to resume recording.
• A maximum of 99 marks can be added to a take.
HINT
• During playback, you can press
and to jump to
points where marks have been added.
• You can also add marks without pausing. (Ο P. 119)
4. Press to stop.
NOTE
• If the maximum file size is exceeded during recording (Ο
P.33), recording will continue in a new take with a number
that is one higher. No gap in sound will occur between the
two takes when this happens.
• When recording on 2 SD cards simultaneously, if recording
should stop on one because it runs out of space, recording
will continue on the other SD card without interruption.
HINT
• Files are automatically saved at regular intervals during
recording. Even if the power is interrupted or another
unexpected problem occurs during recording, an affected
file can be restored to normal by playing it with the
.
• Press and hold when the HOME screen is open to
check the name that will be given to the next take recorded.
To Next Page
Loading...
Need help?
General
