EasyManua.ls Logo

Zoom F8 - Specifications; Input Specifications; Output Specifications

Zoom F8
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendices
6SHFLðFDWLRQV
137
F8 Multi Track Field Recorder
Recording media Dual SD card slots support 16MB–2GB SD cards, 4GB–32GB SDHC cards and 64GB–512GB SDXC cards
Inputs
INPUT 1–8 Connectors XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot)
XLR inputs (MIC)
Input gain +10 – +75 dB
Input impedance 3.3 kΩ
Maximum input level +14 dBu (at 0 dBFS, limiter ON)
Phantom power +24/+48V 10mA maximum for each channel
TRS inputs (LINE)
Input gain 10 – +55 dB
Input impedance 28 kΩ
Maximum input level +34 dBu (at 0 dBFS, limiter ON)
Equivalent input
noise
127 dBu or less (A-weighted, +75dB input gain, 150Ω input)
Frequency
characteristics
10 Hz – 80 kHz +0.5dB/1dB (192kHz sampling rate)
A/D dynamic range 120 dB typ (60dBFS input, A-weighted)
Crosstalk 90 dB or less (between adjacent channels, 1kHz)
MIC IN ZOOM mic capsule input (use disables Inputs 1/2)
SLATE MIC Built-in mic for voice memos can be assigned to tracks freely
Outputs
MAIN OUT 1/2
Connectors TA-3 connectors, balanced output (2: hot)
Output impedance 150 Ω or less
Reference output level 10 dBV (Normal Output Level), 40 dBV (Mic Output Level), 1 kHz, 600Ω load
Maximum output level +10 dBV (Normal Output Level), 20 dBV (Mic Output Level), 1 kHz, 600Ω load
SUB OUT 1/2
Connector 3.5mm stereo mini unbalanced output jack
Output impedance 100 Ω or less
Reference output level 10 dBV (Normal Output Level), 40 dBV (Mic Output Level), 1 kHz, 10kΩ load
Maximum output level +10 dBV (Normal Output Level), 20 dBV (Mic Output Level), 1 kHz, 10kΩ load
HEADPHONE
Connector 1/4" unbalanced stereo output jack
Output impedance 15 Ω or less
Maximum output level 100mW + 100mW (32Ω load)
D/A dynamic range 106 dB typ (60dBFS input, A-weighted)
Specifications

Table of Contents

Other manuals for Zoom F8

Related product manuals