Recording
Setting the sampling rate (Sample Rate)
27
F8 Multi Track Field Recorder
Setting the sampling rate (Sample Rate)
1. Press .
2. Use to select “
REC
”, and
press
.
3. Use to select “
Sample
Rate
”, and press .
4. Use to select the
sampling rate, and
press
.
Setting value Explanation
44.1kHz, 48kHz,
88.2kHz, 96kHz, 192kHz
These are standard sampling rates.
47.952kHz
Select this when recording video at 23.976 frames
per second if you want to edit at 24 frames per
second later.
48.048kHz
Select this when recording video at 24 frames per
second if you want to edit at NTSC 29.97 or 23.98
HD later.
47.952kHz (F),
48.048kHz(F )
These function the same as the two above, but the
sampling rate metadata will be recorded as 48kHz
for <FILE_SAMPLE_RATE>.
This enables playback and editing with devices
and software that do not support 47.952kHz and
48.048kHz WAV files. Playback, however, will
occur at the ±0.1% the speed at which the file was
recorded.
NOTE
• When the recording file format is MP3, only 44.1kHz and 48kHz
can be selected.
• When 192kHz is selected, L/R tracks will not be recorded. The
Input Delay and Output Delay are also disabled.
You can set the sampling rate used to record files.
To Next Page
Loading...
Need help?
General
