Zoom F8 - Applying Delays to Outputs (Output Delay)

Output settings
Applying delays to outputs (Output Delay)
79
F8 Multi Track Field Recorder
Applying delays to outputs (Output Delay)
1. Press .
2. Use to select “ OUTPUT ”,
and press
.
3. Use to select “ Output
Delay
”, and press .
4. Use to select the
output, and press
.
HINT
Select “
ALL “ to set all the outputs at the same time.
5. Use to adjust the delay
in frames, and press
.
HINT
This can be set from 0.0 to 10.0 frames.
NOTE
• The delay in milliseconds depends on the frame rate of the
selected timecode.
• When Sample Rate is set to 192kHz, Output Delay is disabled.
By delaying outputs, you can correct timing differences for audio input to other devices.