Using USB functions
Audio interface settings
110
Audio interface settings
Setting loop back (Stereo Mix only)
This function allows the playback sound from the computer
or iPad and the
inputs to be mixed and sent back to
the computer or iPad (loop back).
You can use this function to add narration to music played
back from the computer and record the mix or stream it on
the computer, for example.
1. Press .
2. Use to select “
LOOP
BACK
”, and press .
3. Use to select “
On
”, and
press
.
Mixing inputs
You can adjust the mix balance of the inputs. Input signals
will be sent to the computer or iPad using this balance set-
tings made here. When using a Stereo Mix setting, the mixed
stereo signal will be sent.
1. Open the mixer on the Home
Screen. (Ο P.11)
2. Adjust the parameter settings.
π Editing operations
Move cursor or change value: turn
Select parameter to change: press
The following settings can be made when using the as an audio interface. See the relevant pages for details about
operation.
To Next Page
Loading...
Need help?
General
