Zoom F8 - Cutting Low-Frequency Noise (HPF)

Input settings
&XWWLQJORZIUHTXHQF\QRLVH+3)
59
F8 Multi Track Field Recorder
Cutting low-frequency noise (HPF)
1. Press .
2. Use to select “ INPUT ”,
and press
.
3. Use to select “ HPF ”, and
press
.
4. Use to select the track,
and press
.
HINT
Select “
ALL “ to set all the tracks at the same time.
5. Use to set the cutoff
frequency, and press
.
NOTE
The HPF also affects dual channel recording data.
HINT
This can be set to Off or between 80 and 240 Hz.
The high pass filter can cut low frequencies to reduce the sound of wind, vocal pops and other noise.