Zoom F8 - Editing Project Names

Take and folder operations
Checking and editing take metadata
54
Editing project names
5. Use to select “ Project
Name
”, and press .
6. Edit the project name.
See "Character input screen" (Ο
P.12) for how to input characters.
NOTE
• The project name is written to the <PROJECT> metadata.
• The project name used immediately after recording is the
name of the highest level folder (inside the SD card root
directory) that contains the folder in which the take was
recorded.
• You cannot put a space or an @ mark at the beginning of
the name.
Checking and editing take metadata (continued)