Zoom F8 - Setting Automatic Timecode Recording Delay (Auto Rec Delay Time)

TIMECODE
Setting automatic timecode recording delay (Auto Rec Delay Time)
95
F8 Multi Track Field Recorder
Setting automatic timecode recording delay (Auto Rec Delay Time)
1. Press .
2. Use to select “ TIMECODE ”,
and press
.
3. Use to select “ Auto Rec
Delay Time
”, and press .
4. Use to adjust the time,
and press
.
HINT
This can be set from 0.0 to 8.0 s.
If set to record automatically when external timecode is received, unnecessary recording could occur when timecode is received
for a brief amount time. In order to prevent this, you can set the amount of time until recording starts after timecode is received.