Recording
Changing recording take settings (Next Take)
38
Changing scene names
If Scene Name Mode is set to User Name, set the scene name
used like this.
4. Use to select “
User
Scene
Name
”, and press .
5. Use to select “
Edit
”, and
press
.
6. Edit the scene name.
See "Character input screen" (Ο
P.12) for how to input characters.
NOTE
• The scene name is written to the <SCENE> metadata.
• You cannot put a space or an @ mark at the beginning of
the name.
Setting value Explanation
None
The scene name and number are not used.
When recording files are created, they are named
only with the take number: "T001", "T002",
"T003", etc.
+ cannot be used to advance the scene
number by 1.
Example: T001.wav
Current Folder
The name of the currently selected folder is used
as the scene name.
+ can be used to advance the scene
number by 1. After advancing the scene number
by 1, the corresponding folder will be used as
the recording destination. If that folder does not
already exist, it will be created.
Example: FOLDER001-T001.wav
Date
The date is used as the scene name.
+ cannot be used to advance the scene
number by 1.
If recording occurs after the date changes, a
scene folder with the date will be created.
Example: 20150101-T001.wav
User Name
A scene name input by the user is used.
+ can be used to advance the scene
number by 1.
No folder is created in this case.
Example: MYSCENE001-T001.wav
Changing recording take settings (Next Take) (continued)
To Next Page
Loading...
Need help?
General
