Zoom F8 - Inverting the Input Phase (Phase Invert)

Input settings
Inverting the input phase (Phase Invert)
64
Inverting the input phase (Phase Invert)
1. Press .
2. Use to select “ INPUT ”,
and press
.
3. Use to select “ Phase
Invert
”, and press .
4. Use to select the track,
and press
.
HINT
Select “
ALL “ to set all the tracks at the same time.
5. Use to select “ On ”, and
press
.
The phase of the input signal can be inverted.
This is useful when sounds cancel each other out due to mic settings.