Input settings
Input limiter
63
F8 Multi Track Field Recorder
NOTE
• Limiter operation is linked for tracks that have stereo link
or MS stereo link enabled. If the signal for either linked
channel reaches the threshold, the limiter will operate on
both tracks.
• When the limiter is operating, the end of the level meter
and the mixer limiter indicator on the display light yellow.
Setting the release time
This sets the amount of time until compression stops after
the input signal goes below the threshold.
5. Use to select “
Release
Time
”, and press .
6. Use to adjust the time,
and press
.
HINT
This can be set from 1 to 500 ms.
To Next Page
Loading...
