Zoom F8 - Setting the Threshold; Setting the Attack Time

Input settings
Input limiter
62
Setting the attack time
This sets the amount of time until compression starts after
the input signal exceeds the threshold.
5. Use to select “ Attack
Time
”, and press .
6. Use to adjust the time,
and press
.
HINT
This can be set from 1 to 4 ms.
Setting the threshold
This sets the base level from which the limiter operates.
5. Use to select
“
Threshold ”, and press .
6. Use to adjust the
setting, and press
.
HINT
This can be set from −16 to −2 dBFS.
Input limiter (continued)