Using USB functions
Exchanging data with a computer (SD Card Reader)
105
F8 Multi Track Field Recorder
Exchanging data with a computer (SD Card Reader)
Connecting with a computer
1. Press .
2. Use to select “
USB
”, and
press
.
3. Use to select “
SD Card
Reader
”, and press .
4. Connect the and computer with a USB cable.
NOTE
• The supported operating systems are as follows.
Windows: Windows Vista or later
Mac OS: Mac OS X (10.6 or later)
• The
cannot operate on USB bus power. Use the internal
batteries, the dedicated AC adapter or an external DC power sup-
ply to power it.
HINT
When the
is connected to a computer, the SD cards loaded
in slots 1 and 2 are recognized as separate SD cards.
Disconnecting
1. Disconnect on the computer.
Windows: Select from "Safely Remove Hardware".
Mac OS: Drag and drop the icon to the Trash.
NOTE
Always conduct computer disconnection procedures before
removing the USB cable.
2. Disconnect the cable from the computer and the
, and press .
By connecting with a computer, you can check and copy data on the cards.
To Next Page
Loading...
Need help?
General
