Zoom F8 - Delaying Input Signals (Input Delay)

Input settings
Delaying input signals (Input Delay)
68
Delaying input signals (Input Delay)
1. Press .
2. Use to select “ INPUT ”,
and press
.
3. Use to select “ Input
Delay
”, and press .
4. Use to select the track,
and press
.
HINT
Select “
ALL “ to set all the tracks at the same time.
5. Use to adjust the delay
time, and press
.
HINT
This can be set from 0 to 30.0 ms.
NOTE
When Sample Rate is set to 192kHz, Input Delay is disabled.
If there are differences in the timing of input sounds, use this function to correct them when recording.