Zoom F8 - Turning the Power On and Off; Powering On the Device; Powering Off the Device

Preparations
7XUQLQJWKHSRZHURQDQGRσ
16
Turning the power on and off
Turning the power on
1. Press and hold briefly.
The LED will light.
NOTE
• The first time you turn the power on after purchase, you
must set the date/time (Ο P. 17). You can also change this
setting later.
• If “No SD Card!” appears on the display, confirm that an
SD card is inserted properly.
• If “Card Protected!” appears on the display, the SD card
write-protection is enabled. Slide the lock switch on the SD
card to disable write-protection.
• If “Invalid SD Card!” appears on the display, the card is
not formatted correctly. Format the card or use a different
card. To format an SD card, see P. 125.
Turning the power off
1. Press and hold briefly.
NOTE
Keep pressing it until the ZOOM logo appears on the LCD.
The will automatically turn off if
it is unused for 10 hours.
To keep the power on always, see "Disabling the Automatic Power
Saving function" on P.19 and set Auto Power OFF to Off.