Preparations
Supplying power
13
F8 Multi Track Field Recorder
Using AA batteries
1. Turn the power off and then loosen the screw in the
battery cover to open it.
2. Remove the battery case from the battery slot.
3. Open the battery case cover.
4. Install the batteries.
＋
−
−
＋
＋
−
−
＋
＋
−
＋
＋
−
−
5. Replace the battery case cover.
6. Load the battery case.
NOTE
Load the case so that the side with the protruding rail is up.
7. Close the battery cover and tighten the screw.
NOTE
• Be careful because the battery case could become loose
unexpectedly if the cover screw is not tightened firmly.
• Use only one type of batteries (alkaline, NiMH or lithium)
at a time.
• After loading batteries, set "Power Source" to the correct
type of battery. (Ο P.20)
• If the remaining battery power indicator becomes red, turn
the power off immediately and install new batteries.
Supplying power
To Next Page
Loading...
