Zoom F8 - Using Phantom Power; Setting Phantom Power Voltage

Input settings
Changing the phantom power settings (Phantom)
66
Setting the voltage
4. Use to select “ Voltage
(For All Inputs)
”, and press
.
5. Use to select the
voltage, and press
.
HINT
When using mics and other equipment that can operate with volt-
ages less than +48V, selecting the lower voltage can reduce power
consumption by the
.
Using phantom power
4. Use to select “ On/Off ”,
and press
.
5. Use to select the track,
and press
.
HINT
Select “
ALL “ to set all the tracks at the same time.
6. Use to select “ On ”, and
press
.
NOTE
When a mic capsule is connected tracks 1/2 are set to Off.
Changing the phantom power settings (Phantom) (continued)