Zoom F8 - Recording Slate Tone

Slate mic/slate tone
Recording a slate tone (Slate Tone)
103
F8 Multi Track Field Recorder
Recording
4. Press to start recording.
5. Push toward the tone side and release.
NOTE
• When the slate tone is in use, other signals input to the tracks that
it is routed to are muted.
• The slate signal is output from the headphone L/R channels
regardless of routing settings.
• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the
levels of the slate mic and slate tone.
HINT
If you push and hold
toward the tone side for one or more
seconds, slate tone input will be enabled until you push the switch
toward TONE again.
NOTE
Routing to tracks 1–8 is not possible when operating as an audio
interface (Stereo Mix).
6. Press .