Zoom F8 - Page 70

Input settings
Converting mid-side input to ordinary stereo (Stereo Link Mode)
70
HINT
Select “
ALL “ to set all the tracks at the same time.
5. Use to select ” MS Stereo
Link
”, and press .
Setting value Explanation
Stereo Link When stereo-linked, inputs are handled normally.
MS Stereo Link
When stereo-linked, signals from a mid-side mic
are converted to ordinary stereo.
NOTE
• When “
MS Stereo Link “ is selected, odd tracks are handled as mid
signals and even tracks as side signals.
• The MS Stereo Link setting is disabled if a mic capsule is con-
nected that cannot have L/R inputs set individually to tracks 1/2.
HINT
• Use
for each track to adjust the mid/side balance.
• You can adjust the side mic level for tracks that have a mid-side
mic capsule connected on the PFL screen.
Converting mid-side input to ordinary stereo (Stereo Link Mode)
(continued)