Zoom F8 - Monitoring Mid-Side Stereo Signals

Output settings
Setting signals sent to headphones (Headphone Routing)
74
Monitoring mid-side stereo signals
Signals from a mid-side stereo mic can be converted to an
ordinary stereo signal for monitoring.
4. Use to select “ MS ”, and
press
.
5. Press .
NOTE
• This is disabled for stereo-linked tracks that have Stereo Link
Mode set to MS Stereo Link.
• This is only enabled for tracks that have a mid-side mic capsule
connected and the Side Mic Level set to RAW.
• When mid-side stereo monitoring is enabled, the prefader tracks
will be routed automatically to the headphone channels, with the
odd to the left and even to the right. In this case, the routing can-
not be changed manually.
Setting signals sent to headphones (Headphone Routing) (continued)