TIMECODE
Setting timecode
92
Setting timecode (continued)
5. Use to select “
Edit
”, and
press
.
6. Edit the value.
π Editing operations
Move cursor or change value:
turn
Select parameter to change: press
HINT
This can be set using numbers from 0 to 9 and letters from A to F.
7. When done changing the
setting, use
to select
“
Enter
”, and press .
6. Use to select the mode,
and press
.
Setting value Explanation
uu uu uu uu You can set these values as you like on the Edit screen.
mm dd yy uu
The month, day and year are entered automatically in that
order using the RTC setting. You can set the "uu" value as
you like on the Edit screen.
dd mm yy uu
The, day, month and year are entered automatically in that
order using the RTC setting. You can set the "uu" value as
you like on the Edit screen.
yy mm dd uu
The year, month and day are entered automatically in that
order using the RTC setting. You can set the "uu" value as
you like on the Edit screen.
HINT
Only "uu" items can be changed.
Setting the user bits (Ubits)
4. Use to select “
Ubits
”, and press .
Setting timecode (continued)
To Next Page
Loading...
Need help?
General
