Zoom F8 - Recording with Slate Mic

Slate mic/slate tone
Recording with the slate mic (Slate Mic)
99
F8 Multi Track Field Recorder
Recording
4. Press to start recording.
5. Push toward the mic and release.
6. To disable the slate mic, push toward the mic
again and release.
NOTE
• When the slate mic is in use, other signals input to the tracks that
it is routed to are muted.
• The slate signal is output from the headphone L/R channels
regardless of routing settings.
• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the
levels of the slate mic and slate tone.
HINT
If you push and hold
toward the mic for two or more seconds,
the slate mic input will be enabled until you release the switch.
5. Use to select the tracks/outputs for slate mic
signal routing and press
.
Clear all settings
Set all to postfader
Select postfader
Off
HINT
Press
to switch between Postfader and Off.
NOTE
Routing to tracks 1–8 is not possible when operating as an audio
interface (Stereo Mix).
6. Press .