Zte ZXA10 C300 - 11.2 Configuring DHCP Server

ZXA10C300CongurationManual(CLI)
CongurationData
Table11-1liststhecongurationdataofanDHCPsnooping.
Table11-1CongurationDataofDHCPSnooping
ItemData
GlobalDHCPlStatus:enable
lOption82:enable
DHCPVLANID200
Uplinkinterface:gei_1/21/1
Serviceinterfacegpon-onu_1/5/1:1(virtualport1)
Steps
1.InEthernetinterfacecongurationmode,conguretheuplinkportVLAN.
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#switchportvlan200tag
ZXAN(config-if)#exit
2.InONUinterfacecongurationmode,conguretheVLANonthevirtualport.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#service-port1vport1user-vlan200vlan200
ZXAN(config-if)#exit
3.EnableDHCPsnoopingontheVLAN.
ZXAN(config)#ipdhcpsnoopingvlan200
4.EnabletheglobalDHCPOption82processing.
ZXAN(config)#dhcpv4-l2-relay-agentvlan200enable
5.(Optional)QuerytheDHCPsnoopingVLANconguration.
ZXAN(config)#showipdhcpsnoopingvlan
DHCPsnoopingstateonvlans
VlanState
-------------------------------
200enable
–EndofSteps–
11.2ConguringDHCPServer
AfteryouconguretheDHCPserverfunction,theZXA10C300canworkasaDHCP
servertoallocateIPaddressestosubscribers.
CongurationData
Table11-2liststhecongurationdataoftheDHCPserver.
11-2
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential