Zte ZXA10 C300 - Configuring ARP Proxy

ZXA10C300CongurationManual(CLI)
2.CongurethegatewayIPaddressoftheMFFVLAN.
ZXAN(config)#ip-servicemac-forced-forwardingvlan100gateway10.1.1.1
3.(Optional)QuerytheglobalMFFconguration.
ZXAN(config)#showip-servicemac-forced-forwarding
Mac-ForcedForwardingstatus:Enabled.
4.(Optional)QuerythegatewayinformationoftheMFFVLAN.
ZXAN(config)#showip-servicegateway
VlanGatewayIPGatewayMACType
--------------------------------------------------------
10010.1.1.100d0.d0c7.0561dynamic-600s
–EndofSteps–
14.7ConguringARPProxy
ThissectiondescribeshowtocongureARPproxytoimplementinterworkingbetween
subscribersunderthesamePONport.
Context
Bydefault,theZXA10C300servicesondifferentONUsunderthesamePONportare
isolated.Whenaservice,suchasVoIP ,requiresinterworkingbetweenthesubscribers
underthesamePONport,theZXA10C300usestheARPproxyfunctiontoachieve
interworkingbetweenthesubscribersinthesameVLANandsamenetworksegmentunder
thesamePONport.
Steps
1.Inlayer-3VLANinterfacemode,congurethelayer-3interfaceIPaddress.
ZXAN(config)#interfacevlan100
ZXAN(config-if-vlan100))#ipaddress10.1.1.1255.255.255.0
Note:
TheVLANistheuserVLAN.TheIPaddressshouldbeinthesamenetworksegment
asthatoftheinterworkingdevice.
2.EnableARPproxyonthelayer-3interface.
ZXAN(config-if-vlan100))#ipproxy-arp
–EndofSteps–
14-14
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential