Zte ZXA10 C300 - Figure 2-2 Configuration Flowchart of the GPON Broadband Service

ZXA10C300CongurationManual(CLI)
Figure2-2CongurationFlowchartoftheGPONBroadbandService
Steps
1.InONUinterfacemode,conguretheT-CONT .
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#tcont1nameT1profile10M
2.ConguretheGEMport.
ZXAN(config-if)#gemport1namegemport1tcont1
ZXAN(config-if)#exit
3.Inuplinkinterfacecongurationmode,conguretheuplinkportVLAN.
ZXAN(config)#interfacegei_1/22/1
ZXAN(config-if)#switchportvlan100tag
ZXAN(config-if)#exit
4.InONUinterfacemode,conguretheserviceportVLAN.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#service-port1vport1user-vlan100vlan100
ZXAN(config-if)#exit
Note:
Bydefault,themappingmodebetweenthevirtualportandtheGEMportis1:1.
5.InONUremotemanagementmode,conguretheservicechannel.
ZXAN(config)#pon-onu-mnggpon-onu_1/5/1:1
2-18
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential