Zte ZXA10 C300 - Configuring the Service Port VLAN

ZXA10C300CongurationManual(CLI)
Note:
WhenyouconguretheuplinkportVLAN,thesystemwillautomaticallycreatethe
correspondingVLAN.
–EndofSteps–
5.2ConguringtheServicePortVLAN
ByconguringtheserviceportVLANonthePONONUinterface,youcanimplementVLAN
translationattheONUlevel.
Prerequisite
TheONUhasbeenauthenticated.
Context
Theserviceportcongurationsupportsthefollowingapplications:
lAddCVLAN+SVLANtountaggedpackets
lAddSVLANtouserVLANsaccordingtouserVLANrange
lTranslateuserVLANtoVLAN+SVLAN
lTranslateEthernetprotocoltypetoVLAN+SVLAN
lTranslate802.1pprioritytoVLAN+SVLAN
lTranslatecombination(userVLAN,Ethernetprotocoltype,and802.1ppriority)to
VLAN+SVLAN
lModifySVLAN802.1ppriority
lTLSVLAN
Steps
1.InONUinterfacecongurationmode,conguretheserviceportVLAN.
ZXAN(config)#interfacegpon-onu_1/6/1:1
ZXAN(config-if)#service-port1vport1user-vlan7vlan8svlan9
ZXAN(config-if)#service-port2vport1other-alltls-vlan501
2.(Optional)QuerytheconguredserviceportVLAN.
ZXAN(config-if)#showservice-portinterfacegpon-onu_1/6/1:1
Interfacegpon-onu_1/6/1:1
SportVportBeginVidEndVidOuterVidInnerVidUserPrioDscpEtypeFilterVlanC
osSVlanSCosTlsModeIngressEgressQueueStatusEnable
--------------------------------------------------------------------------------
-----------------------------------------------------------
1177------------8-
5-2
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential