Zte ZXA10 C300 - Configuring Queue Mapping; Configuring the Traffic Profile

Chapter7QoSConguration
-----------------------------------------
profileusedby:
gpon-olt_1/5/1
–EndofSteps–
7.2.2ConfiguringQueueMapping
Usingtheprole,youcanimplementqueuemappingontheOLTinterface.
Steps
1.Inglobalcongurationmode,congurethequeuemapprole.
ZXAN(config)#qosqueue-map-profiletestcos-queue-typecos02
2.InOLTinterfacecongurationmode,applythequeuemapprole.
ZXAN(config)#interfacegpon-olt_1/5/1
ZXAN(config-if)#qosqueue-map-profiletest
3.(Optional)QuerytheQoSqueuemappingprole.
ZXAN(config-if)#showqosqueue-map-profiletest
---------------------------------------------------------
profilename:TEST
profiledetail:
----------------------------------------
queue-map:cos-queue-type
queue-number:8
cos-value:01234567
queue-map:21234567
----------------------------------------
profileusedby:
gpon-olt_1/5/1
–EndofSteps–
7.2.3ConfiguringtheTrafficProfile
Usingtheprole,youcanlimitthetrafcontheGPONOLTinterface.
Steps
1.Inglobalcongurationmode,congurethetrafcprole.
ZXAN(config)#traffic-profiletestipcir10240cbs1000pir20480pbs1000
2.InOLTinterfacecongurationmode,applythetrafcprole.
ZXAN(config)#interfacegpon-olt_1/5/1
ZXAN(config-if)#traffic-profiletestdirectionegress
3.(Optional)QuerytheQoStrafcprole.
7-7
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential