Zte ZXA10 C300 - Configuring the GPON MGC Profile

ZXA10C300CongurationManual(CLI)
ItemData
Dialplantabletest
IPaddressoftheproxyserver1.2.3.1
Steps
1.InGPONcongurationmode,conguretheSIPprole.
ZXAN(config)#gpon
ZXAN(config-gpon)#onuprofilesipsip-testproxy1.2.3.1
ZXAN(config-gpon)#onuprofilesipsip-testaccesscodeabc
ZXAN(config-gpon)#onuprofilesipsip-testappsrvvoip-service
ZXAN(config-gpon)#onuprofilesipsip-testdial-plantest
2.(Optional)QuerytheSIPprole.
ZXAN(config-gpon)#showgpononuprofilesipsip-test
Profilename:sip-test
Proxyserver:1.2.3.1
Outboundproxy:1.2.3.1
Registrar:1.2.3.1
Validationscheme:disable
UDPport:5060
DSCP/TOS:0
MediaUDPport:5060
MediaDSCP/TOS:0
DNS1:0.0.0.0
DNS2:0.0.0.0
Registrationexpirationtime:3600(s)
Re-registrationtime:360(s)
Softswitchvendor:
Dialplantablename:test
Releasetimer:10(s)
ROHtimer:15(s)
Linktest:disable
Linktestinterval:N/A
appsrv:voip-service
accesscode:abc
–EndofSteps–
2.10ConguringtheGPONMGCProle
UsingtheGPONMGCprole,youcancongureMGCparametersforGPONONUsin
batches.
2-14
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential