Zte ZXA10 C300 - 11.3 Configuring DHCP Client

ZXA10C300CongurationManual(CLI)
ZXAN(config)#interfacemng1
ZXAN(config-if)#ipaddress10.10.1.1255.255.255.0
ZXAN(config-if)#ipdhcpmodeserver
ZXAN(config-if)#ipdhcppolicydhcppy
ZXAN(config-if)#exit
9.Conguretheroute.
ZXAN(config)#iproutemng0.0.0.00.0.0.010.10.1.254
10.QuerytheDHCPserverclients.
ZXAN(config)#showipdhcpserveruser
Currentonlineusersare0
IndexMACaddrIPaddrStateExpiration
–EndofSteps–
11.3ConguringDHCPClient
TheZXA10C300canworkasaclienttoacquireanIPaddressfromaDHCPserver.
CongurationData
Table11-3liststhecongurationdataoftheDHCPclient.
Table11-3CongurationDataofDHCPClient
ItemData
GlobalDHCPEnable
DHCPclientlVLANID:100
lIPaddressmode:DHCP
lClientID:vlan100
lClassID:c300
lHostname:zxan
Uplinkinterfacegei_1/21/1
Steps
1.EnabletheglobalDHCPfunction.
ZXAN(config)#ipdhcpenable
2.ConguretheresponsepackettypethatisrequestedbytheDHCPclient.
ZXAN(config)#ipdhcpclientbroadcast-flag
3.Intheinterfacecongurationmode,conguretheinterfaceVLAN.
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#switchportvlan100tag
ZXAN(config-if)#exit
11-4
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential