Zte ZXA10 C300 - Configuring the Pppoe Intermediate Agent (Pppoe-IA); Table 14-3 Configuration Data of Pppoe-IA

ZXA10C300CongurationManual(CLI)
ZXAN(config-if)#dhcpv4-l2-relay-agenttrusttruereplacevport1
4.(Optional)QueryeithertheglobalDHCPv4L2RAstatusorDHCPv4L2RAstatuson
vlan.
ZXAN(config)#showdhcpv4-l2-relay-agentglobal
dhcpv4-l2-relay-agentstatus:enable
5.(Optional)QuerytheinterfaceDHCPv4L2RAconguration.
ZXAN(config)#showdhcpv4-l2-relay-agentportgpon-onu_1/5/1:1vport1
OnuVportdhcpv4-l2-relay-agentstatusTrustPolicy
gpon-onu_1/5/1:11enabletruereplace
–EndofSteps–
Result
WhenthesubscribersendsDHCPprotocolpackets,thesystemaddsthefollowingelds
tothepackets:
Circuit-id:ZXA10-C300/ZTEeth5/1/1/0/1:10
Remote-id:REMOTE-ID
//where,10istheoriginaluserVLAN.
14.1.3ConfiguringthePPPoEIntermediateAgent(PPPoE-IA)
WhenPPPoE-IAisenabled,theZXA10C300addsportinformationtotheupstream
PPPoE-IApackets.
Context
WhenusersaccesstheInternetinPPPoEmode,theZXA10C300usesPPPoE-IAto
locateport.ThesystemcarriestheuserinformationinthePPPoE-IAdiscoverypacketsto
reporttotheBRASforuserauthentication,andthusbindingtheuseraccountandcircuit.
TheglobalPPPoE-IAfunctionandVLANPPPoE-IAfunctionaremutuallyexclusive.
CongurationData
Table14-3liststhecongurationdataofPPPoE-IA.
Table14-3CongurationDataofPPPoE-IA
ItemData
PPPoE-IAglobalEnable
PPPoE-IAinterfacelInterface:gpon-onu_1/5/1:1
lVirtualport:1
lPPPoE-IAstatus:enable
lPolicy:trustandreplace
14-4
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential