Zte ZXA10 C300 - Configuring the Voip Service Application Profile; Table 2-9 Configuration Data of the Voip Service Application Profile

Chapter2GPON/XG-PONServiceConguration
ZXAN(config)#gpon
ZXAN(config-gpon)#onuprofilevoip-accesscodeabccall-hold***
2.(Optional)QuerytheVoIPaccesscodeprole.
ZXAN(config-gpon)#showgpononuprofilevoip-accesscode
Profile-name:abc
cancel-call-waiting:
call-hold:***
call-park:
cid-activate:
cid-deactivate:
no-disturb-activation:
no-disturb-deactivation:
no-disturb-pin-change:
emergency-srv-num:
intercom-service:
unattend-blind-call-transfer:
attend-call-transfer:
–EndofSteps–
2.7ConguringtheVoIPServiceApplicationProle
TheVoIPserviceapplicationprolecanbeusedtocongureVoIPadvancedservices,
whicharebasedonSIP,forGPONONUsinbatches.
CongurationData
Table2-9liststhecongurationdataoftheVoIPserviceapplicationprole.
Table2-9CongurationDataoftheVoIPServiceApplicationProle
ItemData
Prolenamevoip-service
CallwaitingEnable
CalltransferEnable
CallholdEnable
3-waycallEnable
Steps
1.InGPONcongurationmode,conguretheVoIPserviceapplicationprole.
ZXAN(config)#gpon
ZXAN(config-gpon)#onuprofilevoip-appsrvvoip-servicecall-waitingenable
call-transferenablecall-holdenable3wayenable
2.(Optional)QuerytheVoIPserviceapplicationprole.
2-11
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential