Zte ZXA10 C300 - Configuring Queue Scheduling

ZXA10C300CongurationManual(CLI)
2.InEthernetinterfacemode,applytheDSCPremarkingprole.
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#qosdscpdscp-remarktest
3.ConguretrustDSCPontheinterface.
ZXAN(config-if)#qostrustdscp
4.(Optional)QuerytheQoScongurationontheinterface.
ZXAN(config-if)#showqosinterfacegei_1/21/1
qosdscpdscp-remarkTEST
qostrustdscp
5.(Optional)QuerytheDSCPremarkingprole.
ZXAN(config)#showqosdscp-to-dscp-profiletest
-----------------------------------------------------------------
profilename:TEST
profiledetail:
-----------------------------------------------------------------
dscplist0123456789101112131415
dscpvalue01213456789101112131415
-----------------------------------------------------------------
dscplist16171819202122232425262728293031
dscpvalue16171819202122232425262728293031
-----------------------------------------------------------------
dscplist32333435363738394041424344454647
dscpvalue32333435363738394041424344454647
-----------------------------------------------------------------
dscplist48495051525354555657585960616263
dscpvalue48495051525354555657585960616263
profileusedby:
gei_1/21/1
–EndofSteps–
7.1.5ConfiguringQueueScheduling
Usingtheprole,youcanimplementqueueschedulingontheEthernetinterface.
Steps
1.Inglobalcongurationmode,congurethequeueschedulingprole.
ZXAN(config)#qosqueue-block-profiletestqueue020queue130
7-4
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential