Zte ZXA10 C300 - 6.2 Configuring the MLD MVLAN

Chapter6IPTVConguration
6.2ConguringtheMLDMVLAN
TheMLDMVLANistheVLANthatcarriestheMLDmulticastdata,whichincludesthe
serviceVLAN,sourceport,receiveport,andmulticastgroup.
CongurationData
Table6-2liststhecongurationdataoftheMLDMVLAN.
Table6-2CongurationDataoftheMLDMVLAN
ItemData
MLDEnable
SpanVLANfunctionEnable
MVLANID200
MVLANworkingmodeProxy
MVLANhostversionMLDv1
MulticastgroupIPaddressff1e::0101–ff1e::0103
Multicastsourceportgei_1/21/1
MulticastreceiveportONUinterface:gpon-onu_1/5/1:1
VirtualportID:1
Steps
1.Inuplinkinterfacecongurationmode,conguretheuplinkportVLAN.
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#switchportvlan200tag
ZXAN(config-if)#exit
2.InONUinterfacemode,conguretheserviceportVLAN.
ZXAN(config)#interfacegpon-onu_1/5/1:1
ZXAN(config-if)#service-port1vport1user-vlan200vlan200
ZXAN(config-if)#exit
3.EnableMLDglobally.
ZXAN(config)#mldenable
4.EnableMLDspanVLANfunction.
ZXAN(config)#mldspan-vlanenable
5.ConguretheMVLAN.
ZXAN(config)#mldmvlan200
6.ConguretheMVLANworkingmode.
ZXAN(config)#mldmvlan200work-modeproxy
7.ConguretheMVLANhostversion.
ZXAN(config)#mldmvlan200host-versionv1
6-5
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential