Zte ZXA10 C300 - Table 4-1 P2 P Service Configuration Data

ZXA10C300CongurationManual(CLI)
Table4-1P2PServiceCongurationData
ItemData
DataserviceVLANIDCVLANID:101–124
SVLANID:1001
MulticastserviceVLANID201
VoIPserviceVLANID301
Uplinkportgei_1/15/1
Serviceportgei_1/5/1
MVLANworkingmodeProxy(default)
MVLANgroup224.1.1.1–224.1.1.3
Steps
1.Inuplinkinterfacecongurationmode,congureuplinkportVLAN.
ZXAN(config)#interfacegei_1/15/1
ZXAN(config-if)#switchportvlan1001,201,301tag
ZXAN(config-if)#exit
2.InP2Pinterfacecongurationmode,congureserviceportVLAN.
ZXAN(config)#interfacegei_1/5/1
ZXAN(config-if)#service-port1user-vlan101to124svlan1001
ZXAN(config-if)#service-port2user-vlan201vlan201
ZXAN(config-if)#service-port3user-vlan301vlan301
ZXAN(config-if)#exit
3.(Optional)EnableglobalIGMPprotocol.
ZXAN(config)#igmpenable
Note:
Bydefault,theglobalIGMPprotocolisenabledontheZXA10C300.
4.CongureIGMPparametersonserviceport.
ZXAN(config)#interfacegei_1/5/1
ZXAN(config-if)#igmpfast-leaveenable
ZXAN(config-if)#exit
5.ConguretheMVLAN.
ZXAN(config)#igmpmvlan201
6.(Optional)CongureMVLANworkingmode.
ZXAN(config)#igmpmvlan201work-modeproxy
4-2
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential